The following is a guide on how to install Giter with Kodak OG inverters.
Parts required:
•
Giter battery
•
BMS cable available on the Segen portal: GITER-RS-3M
•
Compatible Kodak OG inverter
Connection:
Please plug the BMS cable into the COM2 port like indicated.
Then connect the other end of the cable to the inverter Li-Ion port.
It is strongly recommended that the BMS cable is purchased from Segen, the cable is
shielded and offers more protection against noise that could interfere with BMS
communications. The pin outs of the cable are as follow.
Single operation:
The DIP switch should be as follow only when a single battery is in the bank: 0101
0
means the switch is DOWN
1
means the switch is UP
Summary of Contents for G2500-24
Page 1: ...Giter Kodak OG Guide ...