Gis GP 1000, Instruction Manual

Page: 15 / 28

k2 k2
2
1
5
4
3
GP 250/500
10 Nm
k1 k1
3
1
2
1
15 Swiss Lifting Solutions
Figure 2-14 Figure 2-15 Figure 2-16 Figure 2-17
Double fall operation (GP 250/500, GP 1000, GP 1600/2500):
Fit load hook (1) with double fall hook clamp (2) in accordance with figure 2-14. Connect load-side chain end with the chain holder (3)
(Tightening torque for model GP 250/500: 10 Nm) and fasten into the guide rail of the housing. Secure the chain holder with screw (4)
and spring washer (5).
• Note correct arrangement of suspension (dimension k2, see figure 2-15 or for GP 2500 see figure 2-16):
GP 250/500 = 52 mm, GP 1000 = 62 mm, GP 1600 = 73 mm, GP 2500 = 130 mm.
• No longitudinal twisting of the chain (see figure 2-17).
• Grease the bearings thoroughly (deflection roller / load hook).
Figure 2-10 Figure 2-11 Figure 2-12 Figure 2-13