33
EN
USER MANUAL
GI400 / GI410
LEGEND
1-
The initial value of the editable counter from which each new ticket is added (in the 1-3 format, the weighing number = ticket number. If the
ticket number is at zero, it will not appear).
2
- Fixed editable number (if we have the value to 0, will not appear in the ticket)
3- Fixed editable field (if we have the value to 0, will not appear in the ticket.
4- Name Item 1 (only with item 1 on)
5- Value active record of item 1 (only with item 1 on)
6- Name Item 2 (only with item 2 on).
7- Value active record of item 2. (Only with Item 2 on).
8- Weighing number.
9- Header lines (only appear if we have previously edited).
10- Code Element 1
8. ERROR MESSAGES
DISPLAY
POSSIBLE CAUSES
SOLUTION
- O -
Function of initial zero setting or
through a key
in process (blinking message).
1. On the scale is weight value superior to the
accepted limit of the function
1. Unload the scale .
2. The weight on the scale is not steady.
2. Wait until the weight is steady.
If the anomaly persists you must ask for help to your
supplier service centre.
Over L
OVER LOAD
The analog sign of the load cell is out of
the working range of the A/D chip. This
error finishes when the sign reenters the
expected range.
1. Connector of the load cell not connected..
2. Broken cable.
3. Broken load cell (due to overload)
4. Weight on the top scale at its maximum
weight.
1. Control that the connector is correctly connected.
2. Control carefully the cable of connection to the load
cell and replace it if it defective.
3. Control the sign of the cell when unloading. If it is
very high you must also replace it.
If the anomaly persists you must ask for help to your
supplier service centre
.
_ _ _ _ _ _ _
ERROR RD/WR EEPROM
1. Error after an operation of Reading or writing
of the EEprom device
If the anomaly persists you must ask for help to your
supplier service centre.