11
EN
USER MANUAL
GI400 / GI410
4.3.3 TYPE BIP
bEEPt
First we choose the area in which we want the beep to sound, this will occur when entering the selected zone:
no tAr
: When it’s not in the target range.
LoU:
Below the target range.
tGtrnG
: Target range.
HiGH
: Above the target range.
4.3.4 BIP MODE
bEEPM
Then choose the kind of beep: B off/long/short
4.3.5 YES/NO ACTIVE
Finally asks us if we want or not to activate the function checkweigher, in the case of not activating it is memorized the configuration that
we have chosen previously.
Note: The Checkweigher mode remains active until we access the weight mode
4.4 CHECKWEIGHER SIMPLE
CCt SI
This function activates the “CHECK-WEIGHER SIMPLE” mode or simple pass-not-pass mode. In the case of having indicators with numeric
keypad, we can also activate it through F + 9 + 9
The device is prepared to automatically manage up to
3 zones by two weight limits
.
When accessing the
CCt SI
menu the first parameter to be configured is the lower limit. The screen briefly shows InF: and remains showing
L00000
. With the cursor keys or the membrane keyboard, we enter the value of the lower limit and validate with
The screen will briefly shows SuP: and remains showing H00000. With the cursor keys or the membrane keypad, we enter the value of the upper
limit and validate with
The screen briefly shows CWS.on and returns to weighing mode with the simple checkweigher function activated
Note: Simple checkweigher mode remains active until we access the WEIGHT mode. In the case of having indicators with numeric keypad, we
can also deactivate it by pressing F + 9 + 8.
4.5 IT SHOWS THE WEIGHT WITH ONE MORE DECIMAL MORE FOR ACCURACY
bY 10
With the selection of this function the indicator displays one more decimal in the weight.
Once this function is authorized there is an activation of the display. In this situation the less significant number of the display gets activated and
it indicates the value per 1/10 of the division of the verification. The decimal moves but the display does not increase a digit.
With the device connected, the display of the data of weight does not respect the metrological indication. It is for this reason that while it is
activated all the communication with the series channel is inhibited. The display remains active for a period of approximately
6 seconds
, after
this time the terminal, automatically, sets the display in normal weight. Being out of legal metrology, the device keeps extra accuracy till user
press
key.