eN
USER’S MANUAL
TC15
30
CALIBRATION OF THE WEIGHT
LF 1
dISPLAy
dESCrIPTION
the calibration can be done with any weight, but the weight ca not be inferior to 1/100 of the maximum capacity
and it must also never be exceeded.
•p
ress the key
to start the calibration of zero
( press
to exit the calibration without to save and go back to the
menu Lf1)
LF 1
000.000kg
150.00 kg
•
Use the
Numerical keyboard
,
0 ~ 9,
and then press
to introduce the weight with which the calibration
will be done.
( press
to exit the calibration without to save and go back to the menu Lf1)
150.00 kg
•
Place the required weight on the scale as it is indicated in the display.
150.00 kg
•O
nce everything is steady, press the key
to calibrate it
( press
to exit the calibration without to save and
go back to the menu Lf1).
tHE CALIBRAtION IS gOINg tO fINISH AND tHE SCALE WILL gO BACK tO tHE WEIgHINg MODE AUtOMAtICALLY.
CONFIGURATION
LF 2
use the keys
and
to move between the digits of the displays
weight display
000.00 kg
Enter the maximum capacity_
F5
. Use
to select the calibration of weighing unit. Available units are Kg, g
and lb.
unit weight display
dp0 Kg
Enter the position of the decimal point. Use
the numeric keypad
to select calibration weighing unit as needed.
the position of the decimal point can be from 0 to 4.
pieces display
div 0
Use the keys 1, 2 and 5 to enter the value of the divison.
•
Summary of Contents for Baxtran TC15
Page 2: ......
Page 34: ...en USER S MANUAL TC15 34 ...
