ES /
ES / EN
EN /FR / IT / DE
/FR / IT / DE
SW
6
1 INTRODUCTION
▪
Loaded measurement component equipped with high accuracy load-cell.
▪
Large liquid crystal display .
▪
Operating temperature: 15-30ºC
▪
Quick display of weight.
▪
Auto power off to conserve battery power.
▪
Auto calibration via keypad.
▪
TARE function.
▪
Low battery indication.
▪
Overload indication.
▪
Multi-function on weighing and parts counting.
2 BATTERY INSTALLATION
Battery specification: C size (LR14) x 3 pieces not included.
Installation procedure:
1. Remove battery cover from the compartment under the scale.
1. Install batteries with correct polarity.
1. Close battery cover.
3 OPERATION
3.1 KEYPAD FUNCTIONS
Press this key to turn the scale on and off.
When the scale is turned on, LCD shows as figure below and auto zero
after 3 seconds.
Use this key to switch the weight unit such as kg, lb, oz or pcs.
1. Press this key to proceed tare & zero function when power is on. (You
can use tare function to eliminate container weight, then you can net
weight when a container is used)
1. When power is off, press this key for 3 seconds to go into calibration
procedure.
Counting function:
1. When the power is on, press
to select unit in “pcs”.
1. Press
to select sample size of 10, 20, 50, 100 and 200 pieces. * The
larger the sample size, the more accurate unit weight registered.
1. Based on the size selected, place the selected number of sample pieces
on the platform.
