Green Light -
When this light is on, speak
your voice command. If you do not wait until
this light is on, Password Control Center will
not be able to “hear” your command.
Red Lights -
The light indicates whether the
plug is on or off.
GETTING STARTED
1. Plug the Wall Unit into any electrical outlet
located in your room. Position the Desk
Unit on a nightstand or table so that the
MIC will be directly in your line of sight.
2. Plug in an electric appliance into the Wall
Unit. Make sure you remember the order in
which you plugged in your appliances.
This is important for the naming sequence
(see Recording the Names and Plugs
below).
RECORDING THE NAMES FOR
THE UNIT AND PLUGS
After plugging in the Wall Unit and
appliances, press the
Start/Name
button to
record the name of your unit. You will be
prompted to “Name your Password Control
Center”. Wait for the green “Access” light to
illuminate, then say your chosen name in the
MIC.
Make sure when naming the unit you are the
distance you will be when you want to turn
the appliances on or off.
Your “password” for the Password Control
Center is whatever you name the unit. For
example, you could name it “Control” or
“Jellybean”.
NOTE:
If you do not wait until the green light
is on, Password Control Center will not
“hear” your password and will prompt you to
speak again: “Error...please begin again”.
If you are unsuccessful in naming the
Password Control Center, press the
Start/Name
button to begin again. If you are
unsuccessful in naming the plug, press the
corresponding plug button to begin again.
(The Center or plugs can be renamed by
pressing the
Start/Name
button or
corresponding plug buttons.)
Password Control Center will prompt you to
repeat the new name again: “Repeat the
Name”. If you have spoken the name
correctly, the new name will be accepted:
“Name Accepted”.
Password Control Center will prompt you to
record the name for Plug 1: “Name Plug 1”.
RADICA:
®
GIRL TECH
®
PASSWORD CONTROL CENTER
IS A
TRADEMARK OF RADICA GAMES LTD.
© 2000 RADICA GAMES LTD.
PRODUCT SHAPE™
ALL RIGHTS RESERVED
U.S. CUSTOMER SUPPORT LINE: 1-800-803-9611
www.girltech.com
Wait for the green “Access” light to illuminate,
then say the chosen name in the MIC.
Password Control Center will prompt you to
repeat the new name again: “Repeat the
Name”. If you have spoken the name
correctly, the new name will be accepted:
“Name Accepted”.
Password Control Center will prompt you to
record the name for Plug 2: “Name Plug 2”.
Wait for the green “Access” light to illuminate,
then say the chosen name in the MIC.
Password Control Center will prompt you to
repeat the new name again: “Repeat the
Name”. If you have spoken the name
correctly, the new name will be accepted:
“Name Accepted”.
HELPFUL HINT:
1. Be sure to speak clearly and say your
password exactly the same each time! For
Password Control Center to work best,
record your password with consistent
background noise. For example, if you
record your names with no background
noise, Password Control Center will have
difficulty recognizing your voice commands
if there are people talking in the
background.
Example of names: If you have a stereo,
you could name it “tunes”, “boom box” or
“music”. If you have a lamp, you could
name it “light”.
2. Make sure you name Plug 1 and Plug 2
with the appliances you have plugged into
1 and 2.
3. Make sure your appliances are left in the
“On” position.
USING YOUR PASSWORD
CONTROL CENTER
Now you can turn things on or off in your
room with the sound of your voice. When you
want to use Password Control Center,
address Password Control Center by name.
Wait for the beep, then say the name of the
appliance you want to turn on or off. See
example below.
For example: You name the unit "Control".
"Control, (beep) Music" - turns your music
on and the red light turns on.
"Control, (beep) Music" - turns your music
off and the red light turns off.
Wait for the beep after you say the name of
your Password Control Center. Remember to
make sure the MIC is directly in your line of
sight.
If Password Control Center does not
recognize your command, the Green Access
light will continue to blink. Repeat the plug
name. If it still does not recognize your voice,
wait five seconds and repeat the sequence by
saying the Units’ name and the Plug’s name.
RESETTING PASSWORD
CONTROL CENTER
Press the
Reset
button to erase the Unit
name and Plug names. Press the
Start/Name
button to rename your unit, Plug 1 and Plug
2.
MAINTENANCE
• Handle this product carefully.
• Store this product away from dusty or dirty
areas.
• Keep this product away from moisture or
extreme temperature.
• Do not disassemble this product. If a
problem occurs, press the “Reset” button,
or unplug the unit to reset the product. If
problems persist, consult your warranty
card for replacement instructions.
Please retain this for future reference.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
WARNING:
Changes or modifications to this
unit not expressly approved by the party
responsible for compliance could void the
user’s authority to operate the equipment.
PLEASE NOTE:
This equipment has been
tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed
to provide reasonable protection against
harmful interference in a residential
installation. This equipment generates, uses
and can radiate radio frequency energy and if
not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct
the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio
TV technician for help.
PLUG WALL UNIT
INTO AN ELECTRIC
OUTLET
PLUG TWO
ELECTRIC
APPLIANCES INTO
THE WALL UNIT
