- 2 -
www.girapow.com
The LED display goes off approximately 15 seconds after releasing the switch trigger.
NOTE:
*When the tool is overheated, the light flashes and then the LED display goes off. In this case, cool down the
tool before operating again.
*When the LED display goes off, the tool is turned off to save the battery power. To check the remaining battery
capacity, slightly pull the switch trigger.
Do not look in the light or see the source of light directly.
Square Drive
Always use the correct size impact socket for bolts and nuts. An
incorrect size impact socket will result in inaccurate and
inconsistent fastening torque and/or damage to the bolt or nut.
Align the hole in the side of the impact socket with the detent
pin on the square drive and push the impact socket onto the
square drive until it locks into place. Tap it lightly if required. To
remove the impact socket, simply pull it off.
Make sure that the impact socket and the mounting portion are not damaged before installing the impact
socket.
After inserting the impact socket, make sure that it is firmly secured. If it comes out, do not use it.
Reversing Switch Lever
This tool has a reversing switch to change the direction of
rotation. Depress the reversing switch lever from the A side for
clockwise rotation or from the B side for counterclockwise
rotation. When the reversing switch lever is in the neutral
position, the switch trigger cannot be pulled.
Always check the direction of rotation before operation.
Use the reversing switch only after the tool comes to a complete
stop. Changing the direction of rotation before the tool stops
may damage the tool.
When not operating the tool, always set the reversing switch lever to the neutral position.
Battery Indicator Lamps
When you pull the switch trigger, the LED display shows the
remaining battery capacity. The remaining battery capacity is
shown as the following table.
Battery indicator status
Remaining battery
capacity
On
Off
50% to 100%
20% to 50%
0% to 20%
A
B
A
B
A
B
A
B
A
B
! CAUTION:
! CAUTION:
! CAUTION:
