14
Settings
Settings
Once you have completed the basic config, the settings menu opens automatically.
Otherwise:
1. Enable programming mode (press and hold “Systemprog.” on the control unit for 3 seconds).
2. Tap
and select “Settings access” in the menu bar. Navigate the settings menu by scrolling with
your finger.
All settings shown below are for programming mode only (indicated by the header “System
programming mode” beside
).
Assigning home station and door station
The call buttons must be assigned via the light
button of the home station as specified in the
system manual.
System programming mode
exit
Functions
Image memory
Internal calls
Floor calls
Cameras
Switching actions
Door calls
Manage favourites
Summary of Contents for Surface-mounted video home station 7
Page 13: ...13...
Page 43: ...43 Warranty...
