GIRA
Info
KNX IP-Router
Installation Instructions
KNX IP-Router
9/07
Page 3 of 4
Commissioning
Physical address and application software
Use as
line coupler:
Physical address x.y.0.
Use as
area coupler: Physical address x.0.0.
Use as
data interface: Physical address x.y.z.
When used as line/area coupler, no other lin/area
coupler must be operated in the same segment.
Commissioning software from ETS2 version 1.2 on-
wards.
• Press programming key (9).
Programming LED (10) is illuminated.
• Assign the physical address.
The programming LED is extinguished.
• Note the physical address on the device label (11).
• Download the application software, filter tables, pa-
rameters etc.
i
Wiring example see figure 3.
i
The IP address (e.g. 255.173.27.39) is loaded
as parameter togehter with the application
software into the device or automatically as-
signed by a DHCP service.
