GIRA
Info
KNX IP-Router
Installation Instructions
KNX IP-Router
9/07
Page 2 of 4
Status LED (Figure 1)
(1) LINE (yellow) data reception on KNX line
(2) RUN (green) ready for operation
(3) LK (green)
Ethernet link signal (lit up during
active connection with the IP net-
work)
(4) RX (yellow)
Ethernet receive signal (lit up/
flashing on reception of valid IP
telegrams)
(5) TX (yellow)
Ethernet transmit signal (lit up/
flashing during active transmis-
sion to the IP network)
Information for qualified electricians
Fitting and electrical connection
Fitting in fixed installations indoors, in dry rooms,
power distributions or small housings with DIN rail.
Observe the temperature range. Ensure sufficient
cooling.
• Install by snap-fastening on mounting rail in acc.
with EN 60715. Mounting position see figure 2.
• Connect the external power supply to terminal (7).
Recommendation: Use white/yellow terminal.
• Connect the KNX line by means of the black/red
bus terminal (8).
• Connect the IP side with RJ45 connector plugged
into RJ socket (6).
DANGER!
Risk of electric shock on accidental contact with live parts in the fitting environment.
Electric shocks can be fatal.
Before fitting, disconnect the supply voltage and cover up live parts in the working environment.
