background image

DALI Tronic transformer 105 W 

Order-No. : 2380 00 

Operating instructions 

1 Safety instructions 

Electrical equipment may only be installed and fitted by electrically skilled persons. 

Failure to observe the instructions may cause damage to the device and result in fire and 
other hazards. 

Danger of electric shock. Always disconnect before carrying out work on the devise or 
load. At the same time, take into account all circuit breakers that supply dangerous 
voltage to the device or load. 

These instructions are an integral part of the product, and must remain with the end 
customer. 

2 Device components 

Figure 1 

(1)  Fastening screws for terminal cover 
(2)  Mounting holes 
(3)  Terminal covers 

3 Function 

Intended use 

Power supply for LV halogen lamps 

Switching and brightness adjustment is performed with DALI control units or installation 
buttons 

Installation in false ceilings or surface mounting 

Product characteristics 

No-load proof 

Electronic short circuit protection 

Electronic overload protection 

Electronic over-temperature protection 

Suitable for emergency current installation 

1/7 

82575902 

13.05.2011 

DALI Tronic transformer 105 W 

Summary of Contents for DALI Tronic Trafo 105 W








Reviews: