Gira 5023 00, Manual

Page: 8 / 9

Switching actuator / blind actuator 16 A Standard & Komfort
￭ Press and hold down the programming button for > 5 s.
The programming LED flashes quickly.
The device performs a master reset, restarts and is ready for operation again after ap-
prox. 5 s.
Restoring the device to factory settings
Devices can be reset to factory settings with the Gira ETS Service App. This function uses the
firmware contained in the device that was active at the time of delivery (delivery state). Restor-
ing the factory settings causes the devices to lose their physical address and configuration.
6 Technical data
Ambient conditions
Ambient temperature
-5 ... +45 °C
Storage/transport temperature -25 ... +70 °C
KNX
KNX medium
TP256
Commissioning mode S-mode
Rated voltage KNX DC 21 ... 32 V SELV
Current consumption KNX
Order no. 5023 00, 5028 00,
5033 00, 5038 00
5 ... 18 mA
Order no. 5030 00, 5040 00 5 ... 24 mA
Outputs
Switching voltage
AC 250 V ~
Switching current AC1 16 A
Fluorescent lamps 16 AX
Current carrying capacity
Neighbouring outputs
Ʃ 20 A
Loads per output
Ohmic load
3000 W
Capacitive load max. 16 A (140μ)
Motors 1380 VA
Switch-on current 200 μs max. 800 A
Switch-on current 20 ms max. 165 A
Lamp loads 230 V
Incandescent lamps
3000 W
HV halogen lamps 2500 W
HV-LED lamps max. 400 W
LV halogen lamps with electronic transformers 1500 W
LV halogen lamps with inductive transformer 1200 VA
Fluorescent lamps T5/T8
uncompensated
1000 W
parallel compensated 1160 W (140 μF)
twin-lamp circuit 2300 W / 140 μF
8 / 9
82402612 23.09.2020