GIRA
Info
Powernet Built-In Fourfold IR Sensor
Installation Instructions
Powernet Built-In Fourfold IR Sensor
12/97
Page 1 of 3
Powernet Built-In Fourfold IR Sensor
Art. Nr.: 0873 00
System Information
This device is a product of the Gira-Powernet
®
EIB system and complies with EIBA directives. Detailed
technical knowledge obtained in
instabus
or Gira-Powernet
®
EIB training courses is a prerequisite to
proper understanding.
The functionality of this device depends upon the software. Detailed information on loadable software
and attainable functionality may be taken from the manufacturer’s ETS2 product database as well as
from the Gira-Powernet
®
EIB controller database.
Planning, installation and commissioning of the unit is done by means of the ETS2 software, Ver. 1.1
or later, as well as by the Gira-Powernet
®
EIB controller.
Function
This IR sensor receives up to eight IR channels from an infrared hand or wall-mounted transmitter,
evaluates them and sends commands to the Gira-Powernet
®
EIB system, depending upon the
application chosen.
In receiver
c
of the IR sensor, a key
d
is integrated which can send a telegram to the Gira-Powernet
®
EIB system when projected together with the ETS2 and operated.
gb
gn
br
ws
L
N
c
d
L
N
230 V AC ~
50 Hz
illustration
c
Connection Line between Receiver and IR Sensor:
The line must not be laid in parallel with lines carrying mains voltage or with load lines. A distance of a
few centimetres should be kept to avoid electromagnetic radiation.
A1
45°
40
°
A2
illustration
d
Installation
Note when the receiver is driven by a wall-
mounted transmitter: Install the receiver within the
radiation area of the wall-mounted transmitter.
Distance (A2) from the wall to the receiver must
be at least distance (A1) between the wall-
mounted transmitter and the ceiling (refer to
illustration
d
).
