11
Setting the holiday program – UrLb menu item
A holiday program is available in the
UrLb
menu item. You set the starting
date and end date of your absence here. During this period the system
regulates to a constant selectable temperature step. After the holiday
period has expired the holiday program is deleted automatically so that it
is not repeated every year.
Setting the holiday period
1. Go in the program menu to the
UrLb
menu item (see Page 7).
✓
When the
UrLb
menu item is entered the unit displays either:
• The holiday beginning with the day and
month
or
• The display "--.--" if no holiday period has
been defined yet.
2. Press the
S
button in order to set a
holiday period.
✓
The current date is entered automatically as
the holiday beginning.
However, you can also edit this date:
✓
The month is displayed flashing.
3. Press the
+
or
-
button in order to set the month.
4. Confirm with the
S
button.
✓
The day begins to flash.
5. Press the
+
or
-
button in order to set the day.
6. Press the
S
button again.
✓
The display changes to the holiday end.
✓
The month is displayed flashing.
7. Use the same procedure to set the holiday
end (month and day).
8. Confirm each entry with the
S
button.
✓
The operating mode display begins to flash.
9. Press the
+
or
-
button in order to select the desired temperature
step which is to be maintained during the holiday.. All three
temperature steps (Comfort, Lowering and Anti-freeze) are available.
10.Confirm with the
S
button.
✓
After the last confirmation with
S
, the system returns automatically
to the program menu.
11.Press the
P
button and the room temperature controller returns to
the normal view.
✓
As soon as the internal date reaches the
specified holiday day at 0:00 hours, the
temperature step is changed.
The view in the display changes and
displays the holiday end date.
Deleting the holiday period
1. Go to the
UrLb
menu item.
2. Keep the
+
or
-
button pressed for more than 3 seconds in order to
delete a specified holiday period completely.
✓
The room temperature controller returns to the program menu.
3. Press the
P
button and the room temperature controller returns to
the normal view.
