background image

 

 

Ginnys.com • 1.800.544.1590

 

 

IMPORTANT  SAFEGUARDS

 

17. Do NOT place objects or liquids on top of your freezer.

 

18. Do NOT use solvent-based cleaning agents or abrasives on the interior. 

These cleaners may damage or discolor the interior.

 

19. This appliance is designed for indoor, household use only. Do NOT use 

outdoors.

 

20. This appliance is not intended for use by persons (including children) with 

reduced physical, sensory or mental capabilities, or lack of experience and 
knowledge, unless they are supervised or given instruction concerning the 
use of the appliance by a person responsible for their safety.

 

21. NEVER allow children to operate, play with or crawl inside the freezer.

 

22. Do NOT attempt to repair or replace any part of your freezer unless it is 

specifically recommended in this manual. All other servicing should be 
referred to a qualified technician.

 

23. It is important for the freezer to be level in order to work properly. You may 

need to make several adjustments to level it.

 

24. Use 2 or more people to install this freezer. Failure to do so can result in 

back or other injuries.

 

25. Improper installation may result in the risk of fire, electric shock and/or 

injury.

 

26. Do NOT use the freezer for anything other than its intended use.

 

 

DANGER: Risk of child entrapment

 

• Child entrapment and suffocation are not problems of the past. Junked or 

abandoned appliances are still dangerous.

 

• Before you throw away your old freezer: take off the doors and leave the 

shelves in place so that children may not easily climb inside.

 

 

DISPOSAL:

 

 

We strongly encourage responsible appliance recycling/disposal methods. 
Have refrigerant removed by a qualified service technician and check local 
guidelines for proper disposal procedures.

 

INSTALLATION   INSTRUCTIONS

 

Before using your appliance:

 

• Remove the exterior/interior packaging and the adhesive tape from the interior 

parts.

 

• Pull out the bottom panel.

 

• Make sure you have all of the correct parts.

 

• Before connecting the appliance to the power source, let the freezer stand up- 

right for approximately 2 hours. This will reduce the possibility of a malfunction in 
the cooling system from handling during transportation.

 

Installation of your appliance:

 

• Place your appliance on a floor that is firm and completely flat. Leave 1–3 inches 

between the back and sides of the appliance and 12 inches between the top of 
the appliance and the ceiling.

 

• Install the appliance away from direct sunlight and sources of heat (stove, 

heater, radiator, etc.) and humidity.

 

• To level your appliance, adjust the legs at the front of the appliance. Set the 

slope of appliance slightly backwards, as this ensures the doors are tightly 
closed.

 

PART NAMES

 

Interior Side View:

 

 
 
 
 
 
 
 

 

1. Thermostat

 

2. Top Hinge Cover

 

3. Fixed Shelf

 

4. Adjustable Legs

 

5. Compressor

 

 

  

 

 

 

  

 

 

Summary of Contents for 712041







Reviews: