BEFORE FIRST USE
6
Ginnys.com 800-544-1590
WARNING: Do not touch the
Evaporator when the Ice Mak-
er is making ice, it may burn
your skin.
WARNING: Do not touch the
Evaporator when the Ice Mak-
er is making ice, it may burn
your skin.
1. The incline angle of the ice maker should not exceed 45˚ during
transportation or use. Do not turn the ice maker upside down. Doing so
could cause the compressor or refrigerating system to malfunction.
2. After it is moved or transported, please allow 2 hours for the ice maker to
rest in place so fluids in the compressor can settle.
3. Ensure the ice maker is level and on a stable table or platform. The surface
must be dry with sufficient ventilation, far from heat sources such as
ovens, heaters and corrosive gases. Leave an 8-inch clearance on all sides
of the ice maker for proper ventilation.
4.
Allow the unit to come to room temperature before operating.
5. Do not fill the water reservoir with hot water. This may damage the
ice maker. It is best to fill the water reservoir with water of room
temperature or lower.
6. When first turning on the unit or during ice-making cycles, the compressor
will stay idle for 3 minutes, while energizing.
WARNING: To avoid burns, DO NOT touch the evaporator fingers
when the ice maker is making ice.
Note:
To keep your ice fresh, change the water in the reservoir every
24 hours. When not in use, drain the water from the ice maker.
