6
HOW TO OPERATE
Ginnys.com 800-544-1590
1. Make sure the mixer is OFF and unplugged from the outlet.
2. Insert the beaters or hooks into the sockets at the
bottom of the mixer until they click into place:
a.
Beaters are identical and can be inserted
in either socket.
b.
Dough hooks
are NOT IDENTICAL; the hook
with the washer (see diagram at right) can
only be inserted into the larger socket.
2. Your mixer may be used as a hand mixer or as a stand mixer.
a. Once the beaters/hooks are attached, you are ready to use as a
hand mixer
. Go to step 3.
b. If you wish to use it as a
stand mixer, attach the mixer head to the
stand by aligning the 2 square holes on the bottom of the mixer
head (behind the attachment sockets) with the 2 matching pegs on
the top of the stand. Gently push the mixer head down until the
third peg (on the rear of the top of the stand) locks into position
(you will hear a click). Test that the mixer head is secure by gently
lifting on the head.
- Raise and lower the mixer head
by pressing the head
release button.
- Release the mixer head
for use as a hand mixer by pressing
the head release button while lifting on the mixer head.
3. Put the ingredients in a mixing bowl per recipe instructions.
4. Ensure the speed dial is at 0. Plug the mixer into an electrical outlet.
5. Lower the beaters/hooks into the bowl and start the mixer by pushing the
speed dial forward to 1. Increase speed per recipe instructions. Use the
turbo button as needed (increases speed by 15%).
6. When using as a hand mixer, move the beaters/hooks around the bowl.
When using as a stand mixer, rotate the mixing bowl by hand.
(continued on next page)
