background image

17

GIN Kiteboarding warranty

 
GIN Kiteboarding warrants your kite to be free of major defects in material or workmanship 
to the original purchaser for a period of ninety days from the date of purchase. We invite 
you to register your kite on the website www.ginkites.com during the seven days after your 
purchase. We ask you to keep your original receipt.

This warranty is available under the following conditions :

- The warranty is valid only when the product was registered by the owner at www.ginkites.
com within seven days of the date of purchase. 

- The warranty is valid only when this product is used for normal recreational activities, and 
does not cover products used in rental or teaching operations.

- GIN Kiteboarding  will make the final warranty determination, which may require inspection 
and/or photos of the product, which clearly shows the defects. This information must be 
sent to the GIN Kiteboarding distributor in your country, postage prepaid. Products can be 
returned only after having received the authorization of GIN Kiteboarding.

- If Gin Kiteboarding declares that warranty is valid, the warranty will cover only the repair or 
replacement of the defective product or part. GIN Kiteboarding  will not be responsible for 
any costs, losses or damages incurred due to shipment.

- The warranty does not cover damages caused by misuse, abuse, neglect or normal wear 
and tear - including but not limited to – punctures and rigging with other than GIN Kite-
boarding components. All damages due to : excessive sun exposure / over inflation of the 
bladders / improper handling and storage / use in waves or shore break will not be covered 
by the warranty.  

- The warranty is not valid where any unauthorized repair, change or modification has been 
made to any part of the equipment. 

- The warranty for any repair or replacement equipment is valid from the date of the original 
purchase only. 

- The original purchase receipt must accompany all warranty claims. The name of the retailer 
and date of purchase must be clearly legible. 

- There is no special, extra warranty except those laid out on this page.

Summary of Contents for ZULU II



















Reviews: