17
G
enie L
it
e³
LOOP
A
RESCUE INSTALLATION GUIDE
It is very important to properly install the rescue parachute. If the parachute is not folded correctly or the lines are not
placed properly then a serious if not fatal accident could result. If you have any doubts speak with your instructor or GIN
dealer.
Main rescue installation guide
Begin by first connecting the bridles and the rescue handle to the rescue parachute. Install the rescue into the harness
with the handle connection FACING UP and the extra para line neatly folded on the bottom of the container. Be sure that
the inner bag is installed so the rescue handle loop is facing the opening of the rescue container
(2)
Using the paracord included with your harness pull the built in loop through the metal rings in the order shown below.
First place flap A in the housing shown
(3)
then pull the loop through the first eyelet on the rescue container cover
(4).
Next close the zipper for the rescue bridle tunnel and push the rescue handle wire through the right hand eyelet
(5)
.
Pass the paracord through the left hand eyelet and pull from the inside of the harness
(6)
. Secure the loop with the
rescue handle wire
(7)
. Push the rescue handle wire into its housing and remove the paracord
(8)
*Follow the instructions on the next page.
RECOMMENDED BY GIN:
6MM STAINLESS STEEL SCREWGATE MAILLON
WARNING:
When installing the reserve make
sure the reserve handle is up and the reserve lines are
facing down.
