11
G
enie L
it
e³
INSTALLING THE BACK PROTECTOR
To install the back protector in the Genie Lite 3, first open the zipper compartment under the seat. Insert
the back protector with the narrow end first. Help guide the back protector into the proper position
making sure that the narrow top piece properly sits between the back support and the rescue container.
The back protector should fit snuggly into the container. Once you are sure the protector is installed
correctly, close the protector compartment zipper.
MAINTAINING THE BACK PROTECTOR
We recommend that you inspect your back protection periodically in case it was damaged by rough
handling at the take-off/landing or transportation (e.g. Airport handlers).
We recommend that you do not fly with a back protector that shows signs of damage.
WARNING:
The back protection does not
eliminate the chance of injury as a result of a crash.
WARNING:
If the back protection zip is not ful-
ly closed, the protector will not work effectively
WARNING:
The Koroyd 1.0 back protection
has a valid lifetime of 5 years. The lifetime is a guide
and may change depending on use, care and main-
tenance.
WARNING:
If the harness is subjected to tem-
peratures exceeding 70 degrees Celsius the integrity
of the back protection may be compromised.
