CUTTING AND ASSEMBLY MANUAL
PS-25 R
7
IMPORTANT
The bottom rail requires a cutting reduction of - 8 mm with respect to the total width of the curtain with
caps included, since it does not have caps and it is installed with:
- 2 WASHERS DIN 125 A2 3.2 M3 code: 507505.
- Fixed with 2 SCREWS DIN 7982 2.9x16 mm A2 code: 507502.
02
CURTAIN FABRICATION
CALCULATING THE NUMBER OF PROFILES REQUIRED
To calculate the number of profiles required and im-
prove winding, you will need the following assembly
programme, starting from the bottom in this order:
TRAMO CODE DESCRIPTION
QUANTITY
COVERAGE
1
026058
Rubber 1050
1
6
2
505057
PS-25 R BLIND BOTTOM RAIL
(take away 8 mm from the width of the curtain)
1
43.5
3
505083
PS-25 R MACHINED SLAT **
(take away 10 mm from the width of the curtain)
N
25
4
505056
PS-25 R BLIND SLAT **
(From the height of the opening inside the drawer)
2
25
5
505059
Set of caps PS-25 R With Screws
N
-
6
507502
Screw DIN 7982 H 2.9x16 mm
N
-
7
507505
Washer DIN 125 A2 3.2 M3
2
-
Dimensions in mm
**As many PS-25 R sets of caps with screw code: 505059 will be installed as the total number of PS-25 R slats, except for
the last slat inside the box.
503157
Curtain PS-25 R
3
4
6
5
1
7
2
