Depilator 400
GIMA SpA
MA038B_IT-EN
Manuale d’Istruzione/Instruction’s Manual
25
INSTALLATION
Unpack the unit and its accessories, verify that they have not been damaged during
the transport. In case of damages, do not use the unit and/or its accessories and let
that qualified personel check them.
Verify that the available mains power is in conformity with that of the unit (see the
unit’s rear panel). Before powering the unit, it is necessary to preset the correct
mains voltage by properly set the voltage selector. The unit is factory preset to
230V~.
Connect the furnished mains cable to a socket with a good net connection.
IL FUNZIONAMENTO DELL’APPARECCHIO SENZA CONNESSIONE DI
TERRA E’ PROIBITO.
THE UNIT OPERATION WITHOUT HEARTHING IS FORBIDDEN.
Put the mains switch on O (off). Insert the furnished mains cable in the socket.
Put and block the pedal in the socket called FOOT-SWITCH.
Put the holder handle connector in the socket on the front right side called OUTPUT.
Connect on the holder handle a sterile needle-electrode (see the figure).
Switch on the unit, putting the mains switch on I (on).
Preset the power through the knob LEVEL.
To deliver the high frequency, press the pedal (the delivery is visualized by the
emission signal).
Attention:
the delivery lasts all the time the foot presses the pedal.
