ENGLISH
Step 3:
Put the chair back on top of chair base. (Figure 7)
Make sure the metal bracket slips into the metal bracket of the chair base. (Figure 8)
Press the metal brackets until you can hear the “click” sound when the metal bracket is installed
properly. (Figure 9)
(Figure 7)
(Figure 8)
(Figure 9)
Step 4:
Find the motor wire under the chair base. (Figure 10)
Connect the adaptor with the motor wiring and then connect the plug wiring with the adaptor.
(Figure 11 & 12)
Take the hand control out from the side pocket of the seat. (Figure 13)
The assembly is fi nished, and you can start to use the lift chair.
Once the chair is assembled as per Assembly Instruction, place the chair on a fl at surface in a
dry room. The chair is now ready for use.
(Figura 10)
(Figura 11)
(Figura 12)
(Figura 13)
16
