background image

26

2.1 Features

•  Operation of the product is simple and convenient.

•  The product is small in volume, light in weight (total weight is about 800g

 

including batteries) and convenient in carrying.

•  The instrument can be used under AC&DC, with the lithium rechargeable

 

battery inside, and it will record eighty ECG waveform persistently under

 

the best DC conditions.

•  Voltage indication will be displayed when power on.

•  Classification: internal electrical power source, CF applied part.

•  EMC complies with the requirements of IEC60601-1-2:2001 

 

(refer to the appendix 2).

2.2 Major applications and scope of application

This product is single channel,12 leads electrocardiograph ,can be widely

applied in ECG check-up under different circumstances such as in hospital 

consultation, doctor’s diagnosis, physical check-up,social medical 

organizations etc. it can implement real time continuous records of clear 

and exact single-channel ECG waveform using thermo sensitive printer 

at the same time. waveforms also can be frozen at any time. It has 

manual and automatic modes to be chosen and Chinese/English operation 

interface,it is easy to be used.

2.3 Environment requirements

a.  Ambient temperature: +5°C~+35°C;

 

Transportation and Storage Temperature: -40°C~55°C.

b.  Relative humidity: <95% (without condensation);

 

Transportation and Storage humidity: ≤95%.

c. Power:

 

POWER ADAPTOR: Input AC: 100-240V, 50/60Hz;

 

Output DC: 12V;

 

DC: 7.4V rechargeable battery;

 

The instrument could normally work for more than 4 hours under DC 

 supply.
d.  Barometric: 860hPa~1060hPa.

3 PRINCIPLE AND CAUTION

3.1 Principle of measurement

The equipment is constituted by power source system, signal gathering and

processing, and controlling system etc. The power source system converts 

the Alternating Current or battery volt to the stable Direct Current which the 

equipment needs, meantime, it completes the charge of battery and the 

conversion of alternating current and direct current. The signal gathering and 

processing part is responsible for the clustering of input signal, digital filter 

ENGLISH

Summary of Contents for ecg80a






















Reviews: