9
Field of application
This is a pulse oximeter for the 21st century: reliable, portable and affordable. It is designed to the
fields of hospitals, clinical surgery and home care applications.
PRESCRIPTIONS
Accident prevention
The product shall be used by qualified personnel only.
Do not use the equipment in case it is damaged. Apply to your retailer.
Avoid precarious repairs. Repairs shall be carried out with original spare parts only, which
shall be installed according to the intended use.
Since the product is made of corrosion-proof materials suitable for the enviromental conditions foreseen
for its normal use, does not require special care, however it is necessary to store it in a closed place
making sure that is protected from dust and dirt to assure its hygenic conditions. Moreover, it is
recommended to store the product in a place which can be reached easily by the personnel in case of
necessity.
TRANSPORT
Transport procedures
It is not necessary to follow particular transport procedures. It is however recommended to carefully
handle it and avoid shocks. The equipment is delivered in an imitation leather case allowing a comfortable
shoulder transport.
Unpacking
Always remember that packing elements (paper, cellophane, stitches, adhesive tape, etc.)
can cut and/or hurt if they are not carefully handled.
They shall be removed with adequate means and shall not be left at the mercy of irresponsible
persons; the same is valid for tools used to remove packages (scissors, knives, etc.).
After opening the packages, first of all it is necessary to check all pieces and parts composing the
product. Check that they are all present and in perfect conditions.
INSTALLATION
Installation and connections
The pulse oximeter is delivered with the following components: a practical imitation leather case, 4
“AA” alkaline batteries, AC adapter with 6 V output, 600 mmA, a finger sensor for heart beat survey.
To feed the equipment with 4 “AA” batteries, open the apposite compartment on the back and insert
the batteries. Pay attention not to invert the direction of poles (see the picture inside the battery
compartment) and then replace the cover.
To feed the equipment with an AC adapter, insert the adapter jack into the corresponding socket on the
equipment base and plug in the adapter.
With the exception of rechargeable batteries, remove common or alkaline batteries when
using the AC adapter for charging.
Summary of Contents for COMDEK MD-600P
Page 2: ...2 cod 34290...
