5
FEATURES
This stretcher was designed to make the transportation of patients inside or outside of regular surfaces
or slightly inclined surfaces (max 5%) easier. In emergency cases the stretcher must be lifted and held
by more than one operator.
A semi-automatic closing system on the supporting legs, helps load and unload the stretcher from
properly equipped medical vehicles (ambulances).
For patient safety use the straps and the folding rails C.
The maximum load is 1
59
kg. calculated with the back lowered and the stretcher positioned on a flat
surface.
The product, or parts of the product, must be used only for the purposes it has been designed for and
specified in the instructions of use contained in this manual.
WARNING
The back and foldable side rails C and all the foldable parts are subject to risk of crushing;
be very careful and make sure hands, feet and any other objects are not crushed by these
parts. Non-compliance with these regulations could harm people or damage the equipment.
Do not use the product if damaged and contact the dealer.
Do not perform any temporary repairs. Use original spare parts only which must installed
according to their correct use.
Attention: check tubes, traverses and joints. If there are any burrs remove them with
appropriate tools because they could hurt patients and operators during use.
Do not hit walls, steps or sidewalks because the stretcher could unexpectedly fold or turn
over due to strong crashes.
Since the product is made of corrosion-proof materials suitable for the enviromental conditions foreseen
for its normal use, does not require special care, however it is necessary to store it in a closed place
making sure that is protected from dust and dirt to assure its hygenic conditions. Moreover, it is
recommended to store the product in a place which can be reached easily by the personnel in case of
necessity.
UNPACKING
Always remember that packing elements (paper, cellophane, stitches, adhesive tape, etc.)
can cut and/or hurt if they are not carefully handled.
They shall be removed with adequate means and shall not be left at the mercy of irresponsible
persons; the same is valid for tools used to remove packages (scissors, knives, etc.).
After opening the packages, first of all it is necessary to check all pieces and parts composing the
product. Check that they are all present and in perfect conditions.
