4
ENGLISH
INTRODUCTION
For the purposes of Regulation (EU) 2017/745, the product falls under the CLASS I MEDICAL
DEVICES category. We advise you to read the following manual carefully before using the device.
This model has been designed with the aim of limiting any risks to the user in the event of unintentional
impact, by eliminating sharp edges, sharp corners, etc.
SAFETY
Use for purposes other than what it is intended for is not allowed.
The manufacturer declines all responsibility for damage caused by using the product the wrong or im-
proper way, or in a way unforeseen in the current manual.
For safety reasons, replace any worn or damaged parts immediately.
MAINTENANCE / CLEANING
The 1-joint examination bed does not require any special maintenance; however, before use, it is neces-
sary to check that all the moving parts are tightened correctly.
To clean the bed, a slightly damp cloth can be used; normal detergents can also be used, provided that
they do not contain chlorine and its compounds.
Attention:
• Avoid using hydrogen chloride or bleach.
ASSISTENCE
Should any of the component parts deteriorate beyond general maintenance, contact your distributor,
they will be available to advise you on the most appropriate solution to every kind of problem.
WARNINGS
The information contained in this document are subject to modifications without notice having to be
given.
Disposal: the product described in this manual must be sent to specific companies for scrapping.
GENERAL INFORMATION
Examination bed with a frame made of round polished aluminium tubes Ø 30 x 2 mm thick; fitted with
an elevating, manually adjustable headrest with 1 joint and 2 sections, and upholstered in soft, easily
washable faux leather. The upholstery consists of: chipboard base with low formaldehyde content, helio-
cell sponge with a density of 25 kg/sq m, 4 cm thick, convenient and comfortable.
Unassembled model supplied as a kit
TECHNICAL DATA SHEET
Dimension (L x P x H) cm
176 x 60 x 78
Capacity Kg
90
Net weight kg
22.0
Gross weight kg
27.0
Volume M3
0.21
Number of necks
1
Packaging (LxDxH) Cm
151 x 19 x 74