MEMORY FUNCTION
After switching on the scale, an “M” is displayed which means that the last measured weight is stored in the memory, so that the weigh
difference could be displayed. If you don’t need the weight difference to be shown, then by pressing the TARE button for 3 seconds the
memory can be deleted.
“M” will disappear from the display. If you take out the batteries, then the memory will also be deleted.
ABOUT TARING
If you use not only the tray and the added weight (blanket, pillow etc.) is lighter than 5 kg, after pressing the TARE button the screen dis-
plays “0.00” and the maximal measurable weight will be 20 kg.
If the added weight is heavier than 5 kg, after pressing the TARE button the screen displays “0.00” but the maximal measurable weight will
be less than 20 kg (more precisely: 20 kg minus the added weight).
OTHER INFORMATION ON THE DISPLAY
If the “LO” warning is displayed after switching on (Fig. 4), or there is nothing on the display, the
battery is dead and has to be replaced.
If the sign “Err” appears on the display (Fig. 5.), it means that the scale is overloaded, in this case the
weight must be reduced ( an overload can cause sensor faults).
If the message “OUT2” appears on the display (Fig. 6.), it means sensor fault (after overloading or
after a sudden, big dynamic load). In this case, we have no warranty liability for the product.
CLEANING REPAIR AND MAINTENANCE
The surface of the unit may only be cleaned using a wet cloth. Do not use any detergents or hard
objects as they may damage the unit’s surface!
Never clean the unit under running water, do not rinse it, and do not submerge it in water!
Any extensive maintenance or repair that requires access to the inner parts of the product must be
performed by an expert service centre.
ENVIRONMENTAL PROTECTION:
• Packaging materials and obsolete appliances should be recycled.
• The transport box may be disposed of as sorted waste.
• Polyethylene bags shall be handed over for recycling.
Disposal
: The product must not be disposed of along with other domestic waste. The users must dispose of this equipment by
bringing it to a specific recycling point for electric and electronic equipment.
GIMA WARRANTY TERMS
The Gima 12-month standard B2B warranty applies.
5
ENGLISH
