16
Insert the Batteries
• Open the battery door in the back of the scale.
• Insert the batteries (4 x 1.5V AAA) into the battery com-
partment according to the polarity indications marked
inside the compartment.
* The digits “ 8888 ” will be shown on the LED.
• Close the battery door and wait until the digits “00.00”
are shown on the LED
CAUTION
• When the symbol “Lo” appears, the device will power off in about 4s. Then you shall replace with
a new set of batteries. Please replace all four batteries at the same time. Do NOT mix the old
batteries with the new one.
• Worn batteries are hazardous waste. Do NOT dispose of them together with the household gar-
bage.
• Please refer to the local ordinances and recycling instructions regarding disposal of the worn
batteries and scrapped device.
• If you do not intend to use this unit for a prolonged period of time, it is advisable to remove the
batteries before storing.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-Cd, Ni-MH, etc) batteries.
Install APP and Pair-Up
With the advanced Bluetooth 5.0 technology applied, the mobile or portable equipments, which are
equipped with Bluetooth function in line with BLE Technical Specifications as well as BLP Protocol estab-
lished by global organization Bluetooth SIG, are capable to receive your personal health data.
Just simply install the Tuya Smart App and pair up your scale with your mobile or portable equipments.
Then you may enjoy the comprehensive health solution provided by Tuya.
Note: It is only available for the device which supports Bluetooth 5.0 technology.
• For the first time, the scale will automatically enter bluetooth pairing mode.
• Turn on bluetooth and the Tuya Smart App. Make sure both are ON when pair-up is proceeding.
If SUCCEED, symbol “ ” will be shown on the LED.
ENGLISH
