U
s
e t
h
e P
U
s
h B
U
t
tO
n
4
Use the PUsh BUttON
|
PiPetMaN® M CONNeCteD
Use the Push Button
●
Press the push button
to turn on or wake up
the startup screen
●
a self-calibration
test will begin as the
firmware resets the
piston
●
the pipette is preset to
PiPet
, also known as
standard pipetting
Adjust the Volume
1. hold your PiPetMaN M Connected in a
nearly vertical position.
2. turn the push button half way.
the screen will display:
“
Click to change volume.”
3. Press the push button; the volume on the
display will start blinking, you can now
adjust the volume:
●
turn the push button either
clockwise to decrease volume
or counter clockwise to increase
volume, as indicated on the button.
●
Press the push button one time when
finished. the volume is locked.
4. select a suitable tip for the pipette.
5. PiPetMaN M Connected is now ready to
pipette.
Figure 2
Volume range
displayed on startup
screen
Figure 3
screen displayed
during calibration
Firmware
Version
Number of
readjustments
Figure 4
Volume screen with
pipetting mode
displayed
