9
PIPETMAN® L
|
QUICK GUIDE
QUICK GUIDE
|
PIPETMAN® L
Fitting the Tip Ejector Adapter and the Tip
Ejector Extension
Single Channel Models
For P2L and P10L pipettes
equipped with a stainless steel tip
ejector, a dual-position adapter is
required to fit and eject DL10 tips
(long collar tips) and D10 tips (short
collar tips).
To fit the adapter for short and
long collar tips (refer to Figure 11):
1.
Pull the adapter down
from the stainless steel
tip ejector.
2.
Turn the adapter 180°.
3.
Refit the adapter so that the end of the stainless steel tip
ejector engages the shorter or longer slot of the adapter.
For the F1L, F2L, F5L, F10L, P2L, and P10L
equipped with a
plastic tip ejector, a tip ejector extension is supplied to fit with
D10 tips (short collar tips). Refer to Figure 11.
To fit a tip ejector extension:
1.
Slide the extension over the tip holder.
2.
Push the extension firmly onto the end of the tip ejector
until it clicks into place.
To remove a tip ejector extension:
1.
Gently twist the adapter.
2.
Pull it away from the pipette.
PIPETMAN DIAMOND Tip
Compatibility for fixed volume
model
s
F1L, F2L, F5L,
F10L
D10, DL10, DF10ST,
DFL10ST
F20L, F25L
D200, DF30ST
F50L, F100L
D200, DF100ST
F200L
D200, DF200ST
F250L
D300, DF300ST
F300L, F400L,
F500L, F1000L
D1000,
DF1000ST
F5000
D5000
Short
collar
tips
Long
collar
tips
To fit
To
remove
Figure 11
Tip ejector dual position adapter
and extension for P2L and P10L
1
2
3
4
Multichannel Models
Fitting the Ejector Adapter for P8x10L and P12x10L
Multichannel Models
Depending on the tip used, either D10 or DL10, you may have to
fit the ejector adapter. Long collar tips can be inserted without it.
1.
Remove the tip ejector: keep both ejector locks depressed
1
, and then pull the tip ejector down
2
.
2.
Fit the ejector adapter
3
and click it to the tip ejector.
3.
Gently re-insert the tip ejector vertically into the rails of
the ejector support
4
.
Figure 12
Fitting ejector adapter on multichannel models
A
A
B
B
C
180°
C
