(Continued on back.)
INTRODUCTION
The versatile HM-396 Load Frame can be utilized for multiple soil
tests. California Bearing Ratio (CBR), Unconfined Compressive
Strength, Soil Cement, and Triaxial tests can all be performed
when fitted with the required Component Set. This 10,000lbf
(44.5kN) capacity frame has a strain rate of 0.001 – 0.1 in/min
(0.0254 – 2.54 mm/min) controlled to +/- 1% of set point. Front
panel controls allow the operator to adjust the direction and
speed of the platen. The strain rate is set using the calibration
chart and the three-segment thumbwheel selector. Sliding
the cross-arm up or down the coarse-threaded 1.25in (32mm)
diameter rods and tightening the nuts makes adjustment for the
wide variety of testing components quick and easy.
FEATURES
• Precision adjustable strain rate of 0.001—0.1in/min (0.0254—
2.54mm/min) allows for multiple testing options (calibration
chart included)
• Powerful 1/8hp DC drive motor
• Load capacity up to 10,000lbf (44kN)
• Durable 14-gauge steel cabinet and precision loading screw
with protective rubber boot
• Hardened steel 8in (203mm) diameter platen accepts a wide
variety of test fixtures
• Heavy 1.25in (31.8mm) diameter vertical rods with coarse threads
• Front panel controls
• Upper and lower limit indicator lights
• Three-position control switch with built-in hesitation prevents
motor damage when reversing direction
• Corrosion-resistant components
UNPACKING & SET UP
1. Inspect your HM-396 for damage, remove it from the pallet.
2. Place the Load Frame on a sturdy, level surface such as a bench
top or HMA-94 Rolling Load Frame Cart.
HM-396
Gilson Load Frame
10,000lbf (44.5kN), 0.001—0.1mm/min
HM-396 and HM-396F
OPERATING MANUAL
Rev: 09/2019
PHONE: 800-444-1508
P.O. Box 200, Lewis Center, Ohio 43035-0200
740-548-7298
E-mail: [email protected] Product Web Page:
FAX: 800-255-5314
740-548-5314
