GILMAN Gemini GCH18B, Manual

Page: 5 / 12

Control Panel
ON/OFF
TEMP DEGREE
INDICATOR
MODE OF HEATING
TIMER
TIMER SET
INDICATOR
AMBIENT TEMP
TEMPERATURE
OSCILLATION
LOW / HIGH
HEAT MODE
INDICATOR
4
HEATING
Press MODE button to choose the heat setting. Press the MODE once to activate
Low heating 900W or Press the MODE twice to activate High heating 1800W
which show on the LED display screen.
To turn off your heater anytime press the ON/OFF button on control panel, the heating
element will stop and the fan will operate count down approx. 30 seconds allowing your
heater to cool down before switching off automatically. If the product is in the fan mode
working according to previously not heating mode, the product will directly into the
standby status.
1.
2.
TIMER
Press Timer button to set the countdown time to turn off your heater automatically (from
1-8 hours) when the heater is on.
OSCILLATION
Press button it when the heater is on, the heater will swing from left to right. Press it
again, oscillation will be stopped. The oscillation angle is around 65°.
Temperature + / -
During operation, the ambient temperature is displayed on the control panel.
Press + / - to set the desired temperature( from 10
℃
to 35
℃
), and the display temporarily
shows your preferred temperature before going back to displaying the current temperature.
When the room temperature rises to the set temperature, the heater will stop heating until
the temperature drops a few degrees.
Note: The temperature set using the + / - buttons will not be reached if the set temp is lower
than the current room temperature.
To turn off your heater anytime press the ON/OFF button on the control panel, the heating
element will stop and the fan will operate and count down for approx.30 seconds allowing
your heater to cool down before switching off.
Switch off the power ON/OFF button at the back and unplug the products when it’s not in use
.