SAFETY - 5
GVF Standard Topper-Hedger Manual
SAFETY WHILE SERVICING THE MACHINE
Stop the machine. DO NOT service the
machine while the engine is running or
hot, or if the machine is in motion.
DANGER FIG. 8: To prevent serious
injury or death from moving parts;
KEEP AWAY, moving parts can dismember.
Disconnect and lockout power source
before adjusting and servicing.
Do not operate without guards and
shields in place.
NOTE: When making major repairs or
complicated adjustments, it is recommended
that you consult your Gillison Dealer
and have the work carried out by trained
personnel.
The following precautions should be observed. These
have been arranged by machine area or component.
Hydraulic System
WARNING FIG. 9: High pressure fluid
hazard. To prevent serious injury or
death:
Relieve pressure on system before
repairing, adjusting or disconnecting.
Wear proper hand and eye protection
when searching for leaks. Use wood or
cardboard instead of hands.
Keep all components in good repair.
Ensure that all hydraulic connections are tight.
Relieve all pressures before disconnecting hoses or
lines. Escaping oil under pressure can cause serious
injury.
All fluids should be handled with care. If you are
injured by or swallow any fluid, seek medical attention
immediately and show the label on the product.
Fluid escaping from a very small hole can be almost
invisible and can penetrate the skin causing serious
injury. Keep hands and body away from pin holes and
nozzles which eject fluids under high pressure. When
checking for leaks always use a piece of cardboard or
wood. Never use your hands to find a pressure leak.
If ANY fluid is injected into the skin, it must be attended
to by a doctor immediately.
FIG. 9
FIG. 8
Summary of Contents for GVF 1000
