34.92°
A
Center Line
Hammer Circle
Short Brace
Long Brace
Door Pole
Long Brace
Short Brace
Door Pole
DETAIL A
Attach the braces to the door pole with u-bolts,
but leave them loose until base plate anchors
are installed.
Use the holes in the base plate to mark holes
positions for 1/2" anchor bolts.
NOTES:
1. Left and right sides mirror each other.
2. Surface of caster wheel runways must be level to support doors
through their entire swing.
3. Recommend concrete runways to be a minimum 6" thick.
4. Runway arc measured from door hinge pivot point, Detail "A".
5. Recommend holes in the runways for the door latch pins be drilled
after the doors are in place to ensure proper position and function.
Rear ground sleeves not shown
www.gillathletics.com
800-637-3090
5/26/2019
INST742120
Page 9 of 19
742120 - TALL NCAA HAMMER/DISCUS CAGE
Copright C
All rights reserved.
2019 by Gill Athletics.
BRACE POLES
