10
EN
EN
CAUTION!
Do not need to pull
out all the belts when we clean
the cover.
This step is suit for 15-36 kg
children using this car seat.
(Instruction see 5.2)
6. Pull below both, the shoulder pads
03 and the belts 08 to the front
through the slots.
(Front side of the child seat).
7. Pull the shoulder belts 08
through the slots to the front.
8. Remove the shoulder pads 03
from the shoulder belts 08 and
put them in the storage bag.
9. Lift the lower part of the rear
covers to the top and place it
over the headrest.
10. Roll the shoulder belts 08
together and place them also
into the storage compartments.
11. Grasp the metal plate 14
from underneath and turn it into
a vertical position. Push upwards
and slide the metal plate 14
through the slot 14.
12. Remove the harness buckle 04
with the crotch pad and store it in the
storage bag.
4.9 Removing the cover
A)Headrest
1. Move the headrest of the child
seat to the upper position.
2. Take off the cover from the belt
holder of headrest first, then remove
the cover of the headrest.
B) Removing the 5-point harness
see 4.8. Take off the cover from
backrest and base.
4.10 Re-fitting the Cover:
Simply follow the steps in the
opposite order.
CAUTION!
Never use the child seat
in installation 6.1 without a correct
installed buckle. Make sure that the
metal plate 14 is correctly attached.
CAUTION!
Check that the harness
straps are not twisted and that they
have been correctly inserted in the
belt slots on the cover.
Instruction
Summary of Contents for BebeStars TRANSPORTER 932
