8
EN
EN
4.3 Removing the Fabric Cover
1. Remove the 5-point harness.
2. Take off the cover from the backrest and base.
3. Move the headrest of the child seat up to the highest position.
4. First take the cover off the base of the headrest, then remove the
cover of the headrest.
To re-fit the cover, simply follow the above steps in reverse.
CAUTION! Never use the child seat without a correctly installed buckle.
Make sure that the metal plate is correctly attached.
CAUTION! Check that the harness straps are not twisted and that they
have been correctly inserted in the belt slots of the cover.
1
4
5
4.4 Adjust the Angle of the Child Safety Car Seat
This child safety car seat can be adjusted to 4 positions.
Before fixing a child in the child restraint system, the seat must be set
on the recline position for rear-facing use, lying level (see picture
⑤
) or
in the siting position for forward-facing use, see pictures
①②③④
.
To achieve this, use the recline handle located in front of the child
restraint system between the seat and the base to adjust it to the
desired position.
Four levels of inclination are possible:
①
first level
②
second level
③
third level
④
fourth level
lying level
Instructions
