13
EN
EN
5.2.2 Group
Ⅱ
,
Ⅲ
(15-36KG)
NOTE:
When you use this safety
car seat in group
Ⅱ
,
Ⅲ
, please
remove the 5-point harness,
sleeping pads and the triangle
pads refer to Chapter 4.2.
Place the child seat forward facing on the
vehicle seat (in the direction of travel).
Put the ISOFIX insert guide into the two
ISOFIX attachment points of your vehicle.
NOTE:
The ISOFIX attachment points are
located between the surface and the backrest of the
vehicle seat.
Press the ISOFIX button to pull out the two locking arms from the base
bottom.
Pull the locking arm to and fro until you hear an audible CLICK which
indicates they are fully engaged.
And on both sides of the locking arms' button turn into green safety color.
Guide the diagonal seatbelt section into the belt guidance
②
until it lies
completely in the belt guidance
③
and is not twisted.
NOTE:
Make sure that the diagonal seatbelt
section runs over your child's shoulder bone,
and not in front of his or her neck.
Place the diagonal and lap sections of the
vehicle's seatbelt through the belt guidance
③
on the child safety car seat. Lock the seatbelt
buckle into the vehicle seat buckle with a
CLICK noise.
CAUTION!
The diagonal seat belt section
must run diagonally backward. You can adjust
the course of the belt with your vehicle's
adjustable belt deflector on both sides.
Shake the child safety car seat to make
sure it is securely attached.
Place the lap belt section on the other
side of the child seat in the belt guide
③
.
CAUTION!
The lap belt section must lie as low as possible over your
child's hips on both sides.
Guide the diagonal seat belt section into the belt guidance
②
until it lies
completely in the belt holder and is not twisted.
Instructions
