6
Installation for Group 0+
1. The installation for Group 0+ is rearward facing and if your child's weight is below 9kg,
you cannot make the forward facing installation.
2. For Group 0+, there is only one level and it is level 4 in blue.
3. A special cushion for Group 0+ should be place in the seat.
Step 1: Push the red knob and
adjust the angle of seat to be the
level 4. As shown in the picture,
the arrow should point to 4.
Step 2: Place the safety seat
rearward in the car seat and
make it cling to car seat back.
Step 3: As shown in the picture 3-1, the car safety belt passes through
the hole of the safety seat according to the blue direction. As shown in
the picture 4-1, put the car safety belt tongue into the car buckle.
As shown in the picture 3-2, pull horizontal car belt tight and place
oblique car belt into locking device, then pull belt tight again.
As shown in the picture 3-3, next, put oblique car belt into hook for
Group 0+ and pull belt tight again. Finally, shake the safety seat to
ensure it is already fixed.
EN
EN
