Gilis Bebe Stars 646, User Manual

Page: 8 / 16

ASSEMBLY INSTRUCTIONS
1. See Figure 1: Attach the extensions to the legs. Align the holes, designated for the
fixing screws. Slide the screws and fix them using screwdriver.
2. See Figure 2: Attach the top rails to each other to form a circle. You will need help from
another adult to connect the last 2 rails. One of you must hold the opposite side, while
the other connects the two ends.
3. See Figure 3: Connect the legs (base) to the already assembled frame for the springs.
Fix them using screws.
4. See Figure 4: Turn the jumping mat so that the seams are facing down. Put the pad in
the middle of the frame. Connect one spring to one of the triangular rings on the mat.
Then insert the other end of the spring into the corresponding opening in the frame.
Attach a second spring to the opposite side of the frame. Take 2 springs. Attach the third
one in the middle of the frame between the 1st and 2nd spring. The fourth spring must
be attached to the opposite side of the frame. This way the tension will spread evenly
between the springs. Repeat to attach the rest of the springs. Use the spring fixing tool
for this purpose. We recommend you to leave a distance of 4 – 5 openings between
adjacent springs. Warning! During the spring assembly, be careful not to pinch your
hands or other parts of your body.
5. See Figure 5: After you attach all the springs, place on top of them their cover.
Connect the ties of the cover under the springs.
6. See Figure 6: Connect the bottom poles for the safety net to the legs of the
trampoline. Use bolts, washers, nuts, screwdriver and wrench to fix the poles to the
legs.
7. See Figure 7: Slide the upper poles in the pockets of the safety net.
8. See Figure 8: Attach the upper poles to the bottom poles. Press down until they are
securely fixed.
9. See Figure 9: Slide the pockets of the net and onto the bottom poles so that the net
reaches the frame of the trampoline.
10. See Figure 10: Strengthen the net and connect the hooks on its bottom ends to the
rings on the bottom part of the jumping mat. The zipper must be facing the base and
outwards so that you can easily enter the trampoline.
EN
8