Gilbarco Veeder-Root FlexPay IV Encore 700 S, Manual, Page: 18 / 24

MDE-5287B
14
SECTION 4 - INSTALLATION
4
3
Insert the upper hinge pin.
Figure 8: Inserting Upper Hinge Pin
Upper Hinge Pin
4
Reinstall the main door prop rod.
Main Door Electronics
1
Reinstall the main door electronics, and then reconnect all cabling.
Figure 9: Reinstalling Main Door Electronics and Reconnecting Cables
Reconnect Cables
Main Door Electronics
2
Repeat steps in “REMOVING COMPONENTS” on page 6 and “INSTALLATION” on page 9 for the other
side of the dispenser.
3
Turn on BNA in the Device Config (green screen) in CRIND programming.
4
When installation is complete on the other side, slide the CD top cover back to its original position so
that both of the top hinge pins on the door are covered.