MDE-4017G Mat Reader Assembly Kit (C00016-XXX) Installation Manual · April 2017
Page 31
Installing Mat Reader Assembly
Addressing Logic Board When Daisy Chaining
Address for the mat reader must match the address on the previously installed mat reader.
To set the address on the logic board when daisy chaining, proceed as follows:
1
Access the logic board for the mat reader being installed.
2
Locate the jump jacks on the previously installed Mat Reader Logic Board (M01803A001 or
M01803A002) as appropriate (see
Figure 30: Jump Jacks for Address Setting on M01803A001 Logic Board
Figure 31: Jump Jacks for Address Setting on M01803A002 Logic Board
3
Note the position of jump jacks on the previously installed mat reader logic board and set the
jump jacks on the board for the mat reader being installed to match the address on the logic
board (see
