Suricate – Iridium Optical Link Page | 17
2.3.
Setting up the outdoor unit
The power supply provides:
Stable 13vdc
AC input 100-230VAC 50/60Hz, 0.5A
2.3.1.
Installing the Outdoor unit
2.3.1.1.
Hanging the outdoor unit on a pole
The ODU can be installed on a pole. The installation pole can be at maximum of
45°. The pole diameter must be between 1. 2” to 1.9” (30 - 50 mm).
Place the first bracket on the outer side of the pole. Using two screws screw the
bracket to top of the ODU.
Place the second bracket on the outer side of the pole. Using two screws, screw the
bracket to bottom of the ODU.
Using one screw, secure each bracket to the pole.
Note
Screw length depends on the width of the pole.
2.3.1.2.
2.3.1.2 Hanging the outdoor unit on a wall
Caution
: The ODU is heavy! Make sure that the wall can support its weight (5 kg.)Suitable
bolts must be used. Foxcom recommends that the ODU be installed on a concrete walls
Using the drill sheet provided drill four holes (5/16”) through the markings indicated on
the paper.
Using the drilled holes as a guide, place the ODU on the wall.
Using four screws, secure the ODU to the wall.
