70
Te
mplat
e
G
o
, V
e
rs
ion 1
, 01.
07
.2
014
/ M
odu
leV
e
rs
ion 1
.0
System
Gigaset T440 PRO / Gigaset T640 PRO / Admin Guide INT en / A31008-N2003-R103-2-7620 / system.fm / 6/26/17
SMTP server
Using an integrated SMTP server, your Gigaset PABX emails to users voice mails, faxes, backup
files, backup reports and other system messages (such as changes to user data by
Administrators). You must configure the SMTP server of the system for this.
¤
Administration
System
Network
Email delivery
Parameter:
Usually, a broadcast call-up is used for SIP multicast provisioning in the network. The
telephones then receive the provisioning URL of the PABX via a broadcast response.
If this is not possible in your network, you can use DHCP option 114.
¤
On the DHCP server, set option 114 (URL) as follows:
http://<IP address of the PABX>/gigaset-prov/
This option ensures that the PABX is set as a provisioning server on all phones.
How this option is set depends on the system on which the DHCP server runs.
Example for a Linux DHCP server:
File dhcpd.conf: option dhcp_114_FW_URL "http://192.168.0.50/gigaset-prov/"
If there are any devices in your network with a fixed IP address, you must ensure these
addresses are outside the address range of the DHCP server.
Email delivery
Enable/disable SMTP server
Sender email address
Email address of sender.
Default is noreply@localhost
Sender name
Name of sender.
Default is Galilei PBX
SMTP server
IP address of SMTP server.
SMTP port
Port over which the SMTP server communicates.
Default setting: 25
SMTP authentication
Enable/disable SMTP authentication.
Enabled: The SMTP server expects "login" of the sender before emails
are sent. Entering of a user name and password is used for this.
SMTP user name
User name for SMTP authentication
SMTP password
Password for SMTP authentication