background image

8

Troubleshooting

Siemens Subscriber Networks, Inc. 
4849 Alpha Road 
Dallas, Texas 75244 
(972) 852-1000
Fax (972) 852-1001
[email protected] 
htp://www.siemens.com/subscriber

Copyright©2006, Siemens Home and Office 
Communications Devices LLC. All rights reserved.
Siemens and the Siemens logo are trademarks of 
Siemens AG, Germany. All other trademarks are held 
by their respective companies. Siemens reserves the 
right to make changes to product specifications at any
time without notice. 

LED

Off

Green

Blinking 

Green

Blinking 

Red/Green

Red

Power

Power is off. 

Power is on. 

N/A 

Flash write in
progress. 

- POST in 
progress.
- POST error 
occurred (if 
persistent).

Ethernet
1-4

- Power not 
applied.
- No link. 

Normal 
operation, Link 
okay. 

User traffic 
flowing in either 
direction.

N/A

N/A

Wireless

 - Power not 
applied.
- No link. 

Normal 
operation, Link 
okay. 

Wireless user 
traffic flowing in 
either direction.

N/A

N/A

DSL

- Power not 
applied.
- DSL Signal not 
detected.

DSL line is 
trained and 
ready for traffic.

Steady blinking-
DSL line is 
attempting to 
train.

N/A

N/A

Internet

- Power not 
applied.
- No LAN data 
activity.

- DSL link and 
WAN interface 
are up.
- WAN interface 
has IP Address. 

N/A

N/A

N/A

Activity 

- Power not 
applied.
- No WAN or 
LAN activity. 

N/A 

LAN user traffic
flowing in either
direction.  

N/A

N/A

USB (model 
SE568 only)

- Power not 
applied.
- No link. 

USB connected.  USB user traffic

flowing in either
direction.  

N/A

007_se01_001_print.qxd  26.02.2007  10:34  Seite 8

A31008-M9207-R101-1-7619

A31008-M9207-R101-1-7619

Summary of Contents for SE567









Reviews: