SIEMENS SE565 Residential Gateway
User’s Guide
Chapter 4 Configuring Advanced Features
ISP Connection
SIEMENS
30
Static Routes
Use the static routes advanced option to configure static routes to remote equipment. Static routing allows a
pre-defined route to be set for the transmission of data. Static routes take precedence over all dynamic routing
options and also provide enhanced security over dynamic routing.
To configure the static routes:
1. Click the
Add Static Routes for Direct IP Connections
hyperlink from the
page. This displays the Static Routes page.
2. Type the IP address of the destination device in
Destination
.
3. Type the net mask of the destination device in
Net Mask
.
4. Optionally, type the IP address of a destination gateway in
Next Hop
.
5. Select a connection type from the
Interface
drop-down menu.
6. Click
Apply
. The system responds by adding your new route to the routing table.
To view the current routing table, click the
View the current routing table
hyperlink. This displays a table of
routing information including destination IP address, subnet mask, flags, Gateway, metric and interface of all
static and dynamic routes for network devices.
