41
Using a handset as a Room Monitor (Babyphone)
Gigaset S810H / en / A31008-M2356-R101-1-4N19 / registr_sett.fm / 10.03.2011
V
e
rsion 4.1, 21
.11.2007
Activating the Room Monitor and
entering the destination number
v
¢
É
¢
Room Monitor
¤
You can enter data in the following fields:
Activation:
Select
On
to activate.
Alarm to:
Select
Internal
or
External
.
External number:
Select the number
from the Directory (press display key
ö
)
or enter it manually.
Internal number:
Select display key
§Change§
¢
. Select handset or
Call All
to
call all registered handsets
¢
§OK§
.
In idle status, the destination number or
the internal destination number is dis-
played.
Two Way Talk:
Switch the handset's speaker on or off
(select
On
or
Off
).
Sensitivity:
Select the sensitivity of the sound level
(select
Low
or
High
).
¤
Press
§Save§
to save the settings.
When the Room Monitor function is acti-
vated, the idle display appears as shown
below:
Changing the set destination
number
v
¢
É
¢
Room Monitor
¤
Enter and save number as described in
"Activating the Room Monitor and enter-
ing the destination number"
(
Cancelling/deactivating the
Room Monitor
Press the end call key
a
to cancel the call
when the Room Monitor
is activated
.
In idle status
, press the display key
§OFF§
to
deactivate Room Monitor mode.
Deactivating the Room Monitor
remotely
Prerequisites
: The phone must support tone
dialling and the Room Monitor should be set
for an external destination number.
¤
Accept the call from the Room Monitor
and press keys
9
;
.
The Room Monitor function will deactivate
after the call ends. There are no further
Room Monitor calls. The other Room Moni-
tor settings on the handset (e.g., no ring-
tone) will remain activated until you press
the display key
§OFF§
on the handset.
To reactivate the Room Monitor with the
same phone number:
¤
Turn on the activation again and save
with
§Save§
i
V
07:15
INT 1
22 Oct
Á
Room Monitor
0891234567
OFF
Options
