12
First steps
Gigaset S810-S810A / IM EN / A31008-M2306-R101-1-UZ19 / starting.fm / 03.03.2011
V
e
rsion 4.1, 21
.11.2007
Setting up the handset for use
The display and keypad are protected by plastic films.
Remove the protective films!
Inserting the batteries and closing the battery cover
Warning
Use only rechargeable batteries recommended by Gigaset Communications
GmbH (
page 88), i.e., Never use conventional (non-rechargeable) batteries,
as this could result in significant health risks and personal injury. For example,
the outer casing of the batteries could be damaged or the batteries could
explode. The phone could also malfunction or be damaged as a result of using
batteries that are not of the recommended type.
¤
Insert the batteries with
the polarity in the cor-
rect direction.
The polarity is indicated
in/on the battery com-
partment.
¤
First insert the battery
cover at the top.
¤
Then press the cover until
it clicks into place.
To open the battery cover, for
instance to replace the batter-
ies, insert a coin into the cavity
on the left-hand side of the cas-
ing, then pull the battery cover
in an upward direction.
