Gigaset S670 User Manual Download Page 32

Page: 32 / 68

SMS (text messages)

Gigaset S670 / IM-NORD EN / A31008-M1904-R201-1-SM19 / sms_BRD_neutral.fm / 4.6.07

ion 4,

.09.

2005

Opening the incoming message list via the

SMS menu

(mailbox, mailbox PIN)

Incoming (2)

Reading or deleting individual SMS

messages

Open the incoming message list.

Continue as described in "Reading or

deleting individual SMS messages",

page 27.

After you have read a new SMS, it is given

the status "Old" (is no longer shown in

bold).

Deleting the incoming message list

All

new and old

SMS messages in the list

are deleted.

Open the incoming message list.

§Options§

Open

menu.

To continue, see "Deleting draft mes-

sage list", page 28.

Replying to or forwarding SMS

messages

Read the SMS (page 29):

§Options§

Press the display key.

You have the following options:

Reply

Write and send a reply SMS directly

(page 26).

Edit

Edit the text in the SMS and then send

it (page 26).

Forwarding an SMS

You are reading an SMS (page 29):

§Options§

Press the display key.

Forward

Select and press

§OK§

. For fur-

ther information, see page 26.

Adding numbers to the directory

Adding the sender's number

Open incoming message list and select

entry (page 28).

§Options§

Press the display key. For fur-

ther information, see page 21.

Copying/dialling numbers from an

SMS text

Read the SMS (page 29) and scroll to

the telephone number.

The digits are reverse-highlighted.

Press the display key. For fur-

ther information, see page 21.

Or:

Press the talk key to dial the

number.

If you wish to use the number to send an

SMS:

Save the number with the local area

code (dialling code) in the directory.

Changing the character set

Read the SMS (page 29):

§Options§

Press the display key.

Character Set

Text is shown in the selected character

set.

Please note:

– You can create a special directory for SMS

messages within your main directory by

putting a star (*) before the names.

– An attached mail box identifier is added to

the directory.

Summary of Contents for S670





































































Search results

Summary of Contents for S670

Reviews:

Related manuals for S670

Brands by name

Popular brands

Gigaset S670, User Manual

Search results

Summary of Contents for S670

Reviews:

Related manuals for S670

Brands by name

Popular brands